Your location:
CQ-type magnetic drive pump
Summarize
CQ-type magnetic drive pump (referred to as the magnetic pump) is new product that the working principle of the permanent magnet couplings is used in the centrifugal pump. It has features of reasonable design, advanced technology, fully sealed, no leaks, corrosion-resistant characteristics, and its performance can reach to the foreign advanced level of similar products.
The magnetic drive pump uses the static seal instead of dynamic seal. It makes sure that the pump flow component is in a completely sealed state and completely solves drawbacks that the other pumps mechanical seal cannot be avoided to run, drop. Magnetic pump chooses corrosion-resistant, high strength engineering plastics and corundum ceramics, stainless steel and other materials for manufacturing, so it has good corrosion resistance, and can make the transmission medium escaped from pollution.
Main materials and usage
The magnetic drive pump has advantages of compact structure, beautiful appearance, small size, low noise and reliable operation, easy maintenance. It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, film, photographic and printing, scientific research institutions, Defense industry, etc. The pump can be applied to pump acid, lye, oils, rare and precious fluid, venom, volatile liquid, circulating water equipment, the matching of the filter. Especially, this pump is desirable for pumping leaky, flammable, explosive liquids.
型号与意义 Model and significance
CQ-type magnetic drive pump Magnetic drive pump model and main technology parameter list
型 号Model | 口 径(mm)diameter | 扬 程head | 流 量capacity | 吸 程suction | 电机功率motor power | 转 速speed | 电源电压supply voltage | |
进 口inlet | 出 口outlet | m | 升/分L/MIN | m | KW | 转/分r/min | 伏 volt | |
8CQ-2 | 8 | 6 | 2 | 15 | 2 | 0.025 | 2800 | 220 |
10CQ-3 | 10 | 10 | 3 | 19 | 2.5 | 0.025 | 2800 | 220 |
14CQ-5 | 14 | 10 | 5 | 20 | 3 | 0.12 | 2800 | 220/380 |
16CQ-8 | 16 | 12 | 8 | 30 | 4 | 0.18 | 2800 | 220/380 |
20CQ-12 | 20 | 12 | 12 | 50 | 4 | 1.37 | 2800 | 220/380 |
25CQ-15 | 25 | 20 | 15 | 110 | 4 | 1.10 | 2800 | 380 |
32CQ-15 | 32 | 25 | 15 | 110 | 4 | 1.10 | 2800 | 380 |
32CQ-25 | 32 | 25 | 25 | 110 | 4 | 1.10 | 2800 | 380 |
40CQ-20 | 40 | 32 | 20 | 180 | 7.5 | 2.2 | 2800 | 380 |
40CQ-32 | 40 | 32 | 32 | 200 | 8 | 4 | 2800 | 380 |
50CQ-25 | 50 | 40 | 25 | 240 | 8.3 | 4 | 2800 | 380 |
50CQ-40 | 50 | 40 | 40 | 220 | 7 | 4 | 2800 | 380 |
50CQ-50 | 50 | 32 | 50 | 130 | 8 | 5.5 | 2800 | 380 |
65CQ-25 | 65 | 50 | 25 | 280 | 7 | 5.5 | 2800 | 380 |
65CQ-35 | 65 | 50 | 35 | 450 | 6 | 7.5 | 2800 | 380 |
80CQ-35 | 80 | 65 | 35 | 850 | 7 | 11 | 2800 | 380 |
80CQ-50 | 80 | 65 | 50 | 850 | 7 | 15 | 2800 | 380 |
Magnetic drive pump structure diagram
1. Pump case 2. Static seal 3. Dynamic seal 4.impeller 5. Seal ring 6. Partition 7.distance sleeve 8. Outer magnetic steel 9. Inner magnetic steel 10. Pump axis 11. Axis sleeve 12. Connecting rack 13. Motor
Magnetic drive pump characteristic curve (normal temperature fresh water as test medium)
CQ-type magnetic drive pump
Magnetic drive pump installation dimension chart and diaphragmatic drawing
型号Model | A | B | C | D | E | F | G | H | J | a | K | M | N | 机座螺孔 Base screw holes | P | P1 | Q | Q1 | ф | ф1 | 管子连接pipe connection |
08CQ-2 | 63 | 48 | 45 | 55 | 38 | 200 | 105 | 45 | 15 | 84 | 80 | 24 | 16 | ф6 | |||||||
10CQ-3 | 63 | 48 | 45 | 55 | 38 | 200 | 105 | 45 | 15 | 84 | 80 | 24 | 16 | ф6 | |||||||
14CQ-5 | 90 | 71 | 95 | 107 | 53 | 270 | 120 | 56 | 16 | 130 | 130 | 37 | 18 | ф7 | |||||||
16CQ-8 | 90 | 70 | 80 | 125 | 55 | 320 | 160 | 65 | 18 | 115 | 140 | 40 | 22 | ф11 | |||||||
20CQ-12 | 100 | 80 | 105 | 130 | 59.5 | 340 | 160 | 73 | 18 | 130 | 160 | 65 | 26 | ф12 | |||||||
25CQ-15 | 125 | 100 | 140 | 189.5 | 67.5 | 460 | 205 | 90 | 160 | 240 | 71.5 | ф12 | 75 | 65 | 100 | 90 | 12 | 10 | 法 连 接flange connection | ||
32CQ-15 | 125 | 100 | 140 | 189.5 | 67.5 | 460 | 205 | 90 | 160 | 240 | 71.5 | ф12 | 90 | 75 | 120 | 100 | 12 | 10 | |||
32CQ-25 | 125 | 100 | 140 | 189.5 | 67.5 | 460 | 230 | 90 | 160 | 260 | 85 | ф12 | 90 | 75 | 120 | 100 | 12 | 10 | |||
40CQ-20 | 140 | 120 | 155 | 235 | 75 | 545 | 220 | 100 | 180 | 290 | 78.5 | ф12 | 100 | 90 | 130 | 120 | 14 | 14 | |||
40CQ-32 | 190 | 140 | 190 | 271 | 80 | 620 | 260 | 112 | 245 | 336 | 91 | ф12 | 100 | 90 | 130 | 120 | 14 | 14 | |||
50CQ-25 | 190 | 140 | 190 | 271 | 80 | 620 | 260 | 112 | 245 | 336 | 91 | ф12 | 110 | 100 | 140 | 130 | 14 | 14 | |||
50CQ-40 | 190 | 140 | 190 | 271 | 80 | 620 | 260 | 112 | 245 | 336 | 91 | ф12 | 110 | 100 | 140 | 130 | 14 | 14 | |||
65CQ-25 | 216 | 140 | 200 | 305 | 90 | 695 | 300 | 132 | 280 | 350 | 91 | ф12 | 130 | 110 | 160 | 140 | 14 | 14 | |||
65CQ-35 | 216 | 140 | 200 | 360 | 76 | 720 | 292 | 120 | 280 | 350 | 90 | ф12 | 130 | 110 | 160 | 140 | 14 | 14 | |||
80CQ-35 | 254 | 210 | 890 | 160 | ф12 | 14 | 14 | ||||||||||||||
80CQ-50 | 254 | 210 | 890 | 160 | ф12 | 14 | 14 |